28V DC Power Supply, Standalone

3A Power Supply (SG-500T)

• Ideal for standalone interfaces connected to a single chamber, and when current requirements are minimal.
• Four (4) 2-pin Molex ports
• Includes:
  • Two switched outputs (can be turned on and off)
  • Two unswitched outputs (always on)

10A Power Supply (SG-505)

A flexible power solution.

• Four (4) unswitched M12 ports for connecting up to 8 devices (via daisy-chaining)
• Each M12 connector is limited to 2.5A, the same power connectors as on the SG-7308 PCIC
  • NOTE: Each OmniCtrl connection panel is limited to 1.25A

Adding this power supply is required when a user:

• Has a small smart power + control interface cabinet with 8 OmniCtrl Cards installed, operating 8 chambers with a single OmniCtrl connection panel per chamber and:
  • Adds an additional 8 chambers via daisy-chaining (for a total of 16 chambers)
  • Adds many high power-draw components (levers, feeders, doors, etc.) to each chamber with two OmniCtrl connection panels per chamber daisy-chained together (for a total of 16 connection panels in 8 chambers)
    • NOTE: If sound generation via OmniSound (OSC-112) isn’t desired, and the setup requires mostly low power-draw components, then the OC-124 would be a better choice for daisy-chained setups requiring an above average I/O count.
• Adds additional devices (up to 8) that require 28V power
  • NOTE: Use in this way with any interface system type
• Adds additional items to a system when using an older power + control interface cabinet (SG-6080D) which supplies 4A less power than the SG-505