OmniCtrl Interface Card

Our I/O system is now plug & play! Interface cards are now self addressing, that means no more flipping switches on the board, just insert the card into your smart cabinet (SG-7308/-7316), and the system does the rest.

One card, a multitude of I/O’s! Easily expand your system for future paradigms and chamber configurations, without worrying about how many inputs or outputs your system can handle.

• One interface card can configure 24 ports (up to two 12 I/O control panels) with any combination of inputs or outputs.
  • Both inputs and outputs on a single width module
  • Front panel indicator LEDs to easily monitor the status of each control line: inputs (green), outputs (orange), and incomplete signals (red)
• Use up to 16 modules in an interface cabinet to control 16 independent chambers, modular design makes it easy to add chambers
  • NOTE: Requires one HDMI cable (CAB-HDMI-X) to connect the card to the connection panel, or from previous daisy chained panel.
• Enables Med-PC to respond to the:
  • State of inputs
  • Number of inputs
  • Duration of inputs
  • Time between inputs
• I/O’s now switch on command to operate as:
  • Level to directly reflect the state of the input
  • Toggle to reflect the change of the input
• Inputs can also be set in software to:
  • Accommodate normally open or closed switches
  • Adjust for active low or active high devices
• 3-pin Molex cables are used for both inputs and outputs, each identified by the I/O number assigned in Med-PC 6 (SOF-737, sold separately).
  • NOTE: Refer to the manual for more details.

NOTE: Some adjustment to mounting or placement may be needed as connection panels are not the same size as older models.