Shop
Two standard 28V outputs and inputs (3-pin Mini-Molex®), to a standard Noldus RJ-45 connection. An additional 28V output (2-pin Molex®) can provide power to an additional adapter or any other Med Associates device via “daisy chaining”. TTL expansion port for connecting a Noldus Mini-USB I/O box via ribbon cable (SG-233-48 only) NOTE: SG-233 requires 28V…
Use to control: 28V device (e.g. pellet dispenser) from a 5V TTL output 5V TTL device (e.g. optogenetics laser) from a 28V Med output Internal jumper for user-selection of: Active high = turn on the device when the TTL signal transitions from 0 to 5V (default) Active low = turn on the device when the…
Transmits parallel data. Use to go from the DB25 to 34 pin Adapter (SG-244B) to a Neuralynx Digital Lynx SX card.
Shielded coaxial signal cable used to transmit high or low signals to be read as data. Use with: TTL Connection Panel (SG-726-TTL) 28V DC to TTL Adapter (SG-231) TTL to 28V DC Adapter (SG-230RC) When used with ICSS: Noise free RG-58 coaxial cable with male BNC connectors on each end Connects the stimulator sites…
Use the fork lug end to go from the terminal strip on the SG-230R or SG-231 to a BNC device.
Use to go from the DB25 port on our SuperPort™ TTL Output Module (DIG-726TTL-G) to the 34 pin TTL I/O Port connection on a Neuralynx Digital Lynx SX card. Use with: DB25 Cable M/F (SG-210TTL-20) 34 Conductor Ribbon Cable F/F (SG-244B-C) SKU: SG-244B
Electronically control: Position of the lick block Shutter door for accessing to sipper tube Capacitive lickometer circuit (with sensitivity adjustment) Connects to an interface card in the control computer via a data cable (SG-770) Includes power adapter SKU: DAV-770
Connects the computer to the Control Box (DAV-770). SKU: SG-770
PCIe card to control a single Davis Rig system from one computer. SKU: DIG-770e
Complete your fully operational system with our custom-built computer, perfectly suited for lickometry applications. Ready out of the box, we install all necessary software and hardware to simplify the setup process NOTE: Contact Sales for up-to-date computer specifications SKU: COM-106NV
Easy to install USB design can be used with either a desktop or laptop PC Requires a DB15 cable: (sold separately) SG-219C for legacy open field activity (ENV-520) SG-219D for aversive stimulation and ICSS Can be programmed to control equipment with Med-PC, such as: Aversive stimulation modules ICSS stimulator Open field activity (legacy models) …
Complete your system with a computer that’s ready out of the box. We will install all necessary software and hardware to simplify the setup process.
Summary Software controls: Pulse amplitude Pulse duration Delay duration Frequency Train duration This source code may be used as is, or modified by the user to meet specific research demands Core Procedures REWARD.mpc* ICSS threshold measurement Five trial blocks are presented in descending order until the animal meets an established criteria followed by five…
Summary User-friendly software for computer control and data collection in Brief Access Lickometer studies. Ability to set tube presentation sequence Control presentation times, interstimulus intervals, maximum response latencies, etc. Ability to introduce rinse trials between presentation of tastants. Randomization of tube sequence presentation User-friendly interface helps keep track of each experiment using “project” files, which…
Summary Samples ultrasonic frequencies every 30 milliseconds and differentiates between two user-defined bandwidths Med-PC® can be used in conjunction with the USV detector to turn on the detector, and correlate events such as food or shock delivery with the data acquisition Use with up to 16 devices Software has graphing utilities for: Spectrograms (KHz x…
Real-time display of urine mass Simultaneously record from up to 12 cages Record data for up to 40 consecutive days Keep track of: Animal ID Group Condition SKU: SOF-580
Detects void mass and frequency based on user-defined parameters The Voiding Micturogram™ (VMG) graphically displays void events, identified by a number, with the baseline and peak indicated Void histogram with user-defined bin times Event log summarizes for each void: Start Time Void Mass Intermicturition Interval (IMI) Urine Production Rate (UPR) Data can be exported to…
- « Previous
- 1
- …
- 3
- 4
- 5